Concrete Cutting
print logo

Concrete Cutting - Wire Saw, Chain Saw, Flat Saw

All Trades Contracting employs the a multitude of concrete cutting machines to get the job done right the first time. Our workers are knowledgeable and efficient and our concrete cutting saws and machinery are the best in the industry.

60-inch Concrete Saw

place-in-concrete-cutting-section

 

Wire-sawing

Using a diamond wire is the best way to saw through large thick walls and other large concrete constructions such as foundations and bridges. Our top-of-the-line diamond wire saw is uniquely designed to be powerful and flexible for any of job, big or small. We can cut deeply in confined spaces, precisely in complex structures, both in steel and heavily reinforced concrete.

Wire Sawing a 9 foot diameter  concrete pipe

Wire Sawing a 9 foot diameter concrete pipe

Wire Saw in action

Wire-sawing a 9-foot diameter concrete pipe with a 4-hour timeline at the Thunder Bay Waste Water Treatment Plant. Two saws were used in order to make the deadline. 

From setup to final removal and discard, we offer it all.

image Wire Saw in action

The remote control saves on operator fatigue and provides safer operation. Here, we are removing the 35 ton concrete section with a120-ton crane.

As part of our concrete services, we offer concrete cutting and removal. Our new state-of-the-art equipment can cut through concrete block, as well as poured and pre-stressed concrete walls and floors. The equipment is powered by a remote hydraulic pump which totally reduces exhaust and noise concerns associated with other systems.

Wire-sawing bridge abutment at Jackfish River.

Wire-sawing through 1-1/4" rebar on a bridge abutment.

Wiresawing concrete bridge deck in Thunder Bay Wiresawing concrete bridge deck in Thunder Bay

Cutting a bridge deck using our wire saw.

Wiresaw cutting Thunder Bay

Cutting a concrete bridge abutment using our wire saw.

Wiresaw cutting Thunder Bay

 

Chain Sawing and Flat Sawing

The saw blade is lubricated with running water that is easily cleaned up by a helper as the operator continues to cut. The water also eliminates the need for special dust control systems. We use a diamond tooth chainsaw (15" & 30") for cutting through concrete and rebar. Once cut, the waste piece is removed and hauled from the site.   

Our larger diamond blade saws are capable of cutting to a depth of 31 inches using up to 72" blades.  These saws are the largest in the region, and are operated by training and qualified operators.

replace-photo-of-single-saw-in-chain-saw

 

Our new diamond blade saw

We offer Diamond Cutting in coring, drilling, hand-sawing, and flat-sawing.

Concrete cutting Thunder Bay

Concrete cutting Thunder Bay image

Cutting to remove concrete slab.

Here, we are using the chainsaw to cut out a basement window without overcutting corners. See our diamond teeth concrete cutting chainsaw.

Concrete cutting Thunder Bay Concrete cutting Thunder Bay

2017-08-14-16 

Using a flat saw to cut concrete.

replace-with-photo-of-reg-in-yellow-rain

24-inch core bit

We use the Diamond Cutting System because of the benefits offered to our customers and crew:

  • Dust-free
  • Wet or dry cutting
  • One man operation
  • Cuts through metal
  • Precision cutting
  • No vibrations
  • Reduced noise compared to conventional methods

A member of the Concrete Sawing and Drilling AssociationA member of the Construction Association of Thunder BayA member of the Thunder Bay Chamber of Commerce 

All Trades Contracting is a member of the Concrete Sawing and Drilling Association, the Construction Association of Thunder Bay, and the Thunder Bay Chamber of Commerce.

imageimageimage

Close Window